- Model NO.: QC11Y
- Trademark: RSM
1. THE STRUCTURE OF THE MACHINE
Welded steel plates ( wall board, working table, cutting beam tempered twice and stress relieved ). The stress of the welded parts have been eliminated by vibration.
The machine enjoys high accuracy and high strength and good rigidity.
2. ADVANCED TECHNOLOGY AND PROCEDURES
1)This machine belongs to second generation of hydraulic shear, with advanced integrated hydraulic system with an excellent reliability and easy for maintenance.
2)The shearing angle can be changed so the performance would be good to cut either thick or thin plate.
3)The rolling guide with 3-point support and improves the shearing quality.
4)The power storage device returns steadily and quickly.
5)Upper and bottom blades are all have 4 cutting edges, which can be turned around to use. So the using life of blade would be much extended.
6)Rapidly, accurately and conveniently adjusting the blade clearance with the handwheel. In this way, deformation of the thin plate could be minimized by cutting clearance adjustment.
7)As the cutting beam has been designed in inner-inclined structure, it is easy for plates to fall down and the accuracy of products can also be guaranteed. Shearing in sections (adjust the time displayed on liquid crystal), shadow-line cutting.
8)Shearing compaction device uses independent pressure cylinder which has plastic pad on the bottom to prevent the workpiece from being scratched.
9)Back gauge adopts common screw. With one side positioning function of the E10 system, it can eliminate the tolerance producing by the gap of the screw.
|1||Type||Hydraulic Guillotine shearsType|
|3||Cutting Chickness||20mm(mild steel at 450Mpa)|
|4||Shearing Angle with Indicate||0.5~3 degree adjustable|
|5||Number of stroke per minute||6|
|7||Stroke of back gauge||750mm|
|8||Control system (digital read out)||ESTUN E10|
|9||Main Electric elements in Cabinet||Schneider,France|
|12||Seal in the cylinders||NOK,Japan|
|13||Main hydraulic components||Three Italy solenoid ball valves, one HP solenoid valve|
|14||Switch of electronic box||ABB, Swiss|
|15||Photoelectric safty guard||Autonics,Korea|
|17||Shadow line lighting indicate cutting position;|
|19||Before packing size (mm)||3235X2020X2465|