- Model NO.: AF-3015
- Size: 3000mmx1500mm
- Carving Material: Stainless Steel
1. Adopt cantilever flying optics structure. It is available to load and unload from three directions. Very good operator-machine access ability. Sheet material over 3 meters by 1.5 meters can also be put on the table.
2. With fiber laser, the beam quality is great. The cutting efficiency is high with low consumption. The machine is stable and easy to maintain.
3. Adopt single drive to avoid the difference error caused by double drive. So the cantilever is stable and beam is stable. The cutting precision is high.
4. Adopt the high rigidity aluminum alloy crossbeam (Y axle) analyzed with self-owned intellectual properly rights The weight is light so the movement of Y axle is great.
5. Adopt centralized lubricating device controlled by control system to automatically lubricate the transmission parts so that the living lives and the precision of the transmission parts are protected.
6. Use auto-focusing adjustment system to automatically reset the focusing point when cutting different sheet material. The efficiency is improved greatly.
7. It is available to cut high reflective materials such as aluminum, and brass.
8. The machine is fully closed for protecting the safety of the operators.
9. Adopt FAGOR 8055 control system from Spain with great stability and reliability.
|X- axle positioning precision||± 0.03mm/m|
|RePositioning precision||± 0.02mm|
|Y- axle positioning precision||± 0.03mm/m|
|RePositioning precision||± 0.01mm|
|Acceleration||X, Y axle 1.5g|
|Power of the CO2 laser||500W-4000W|